N copying your tapes (dubbing) – Panasonic PVQ-M2508 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
c
n Copying Your Tapes (Dubbing)
Connections youNI need to make.
• Use this same connection for your video
camera, laser disc player, video games, etc.
Recording (Editing) Combination VCR
1
Insert a pre-recorded tape
into the
Playing (source) VCR.
2
Insert a blank tape
with record tab
into the Recording (editing)
Combination VCR.
Caution:
Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
3
Select
“LINE” as the input on the Combination VCR.
• See “Selecting the Input Mode" section on page 16.
4
Press PLAY
on the VCR.
. Then,
press
PAUSE’when the tape reaches the point at
which you want to start copying.
5
Press REC
on the Combination VCR,
and then
Immediately press PAUSE
on the remote control.
D Press PAUSE
on both units at the same time to begin
copying.
You can edit out unwanted parts of the original recording
by using PAUSE (on the Recording unit) while copying is in progress.
7
Press STOP
on both units to stop copying.
17