Panasonic PVQ-M2508 - Manual (Page 24)

j < < j ь \
Tape Operation (continued)
Your Combination VCR is equipped with
several time saving features as weii as
convenient automatic functions which
make tape operation easier than ever.
Auto Operation Functions
Auto Shut Off
In TV or NITE/GAME mode, when a
broadcast signal is not received for 5
minutes, the Combination VCR will
automatically power off (except when
LINE INPUT is selected).
In Playback mode, when a Video signal
is not detected for 5 minutes, the
Combination VCR will automatically
power off and the tape will be rewound.
• This feature is deactivated when any
button on the unit or remote control
is pressed even if there is no signal
present.
Auto Playback
When a tape is inserted, the power
turns on (Auto). If the record tab* is
removed, playback begins (Auto).
Auto Rewind
When a tape reaches its end during
playback or fast forward the
Combination VCR will rewind the tape
and go into Stop mode.
Playback Auto Eject
(Repeat Play is “OFF.”)
When a tape without a record tab* is
played to its end, the Combination VCR
will rewind and then eject the tape.
Memory Rewind Off
When POWER is pressed during tape
rewind, rewinding will be completed even
though the Combination VCR turns off.
* For record tab information, see page 25,
24
Repeat Play
You can set your Combination VCR up to play a recording over and over.
1
Press ACTION to display the MAIN
MENU.
2
Press to select “VCR,”
and then press ACTION to display
the SET UP VCR screen.
3
Press AV to select “REPEAT
PLAY,” and then press ►
repeatedly to select “ON” or “OFF.”
SELECT ;* ▼ ► KEY
SET :ACTION KEY
------------ SET UP VCR ----------------------
BEEPER rOFF
NOISY CH BLUE BACK:ON
TIME STAMP ;OFF
SELECT:* ▼ KEY
SET :► KEY
END :ACTION KEY
• When REPEAT PLAY : ON Is selected
(the REPEAT indicator lights on the front
panel during playback), the Combination VCR will playback the
tape to its end, or until a blank portion of 30 seconds or more is
reached. (Erased portions of tape are not considered blank.) The
tape is then automatically rewound and played again. This
operation is repeated until you cancel Repeat Play.
• All function buttons (REW, FF, etc.) are operational during Repeat
Play.
4
Press ACTION twice to return to the normal screen.
You may also turn the repeat play feature on and off at the
Combination VCR. During playback, press PLAY/REPEAT
on the Combination VCR once or twice until the REPEAT
indicator tights up (ON), or goes out (OFF).
One Minute Skip
With this feature, you can skip over commercials recorded on a tape.
A Press ZERO/1 MIN in Play mode.
• The Combination VCR will go into FF search mode and skip over 60
seconds of recorded time. Then, normal playback will resume.
Zero Search
You can reset the Time Counter to zero and then return to that point.
3 Press DISPLAY to display the Time
Counter overlay during playback.
b
Press COUNTER RESET to reset
the Time Counter to “0:00:00” at the
desired position.
C
Continue playback, rewind, or
fast forward.
d Press ZERO/1 MIN in Stop mode
when you want to return to “0:00:00.’
• The Combination VCR will go into FF or
REW mode and stop at the last point the
Time Counter was set to 0:00:00.
STOP 12:00AM ABC
0:00:30
SP
STOP 12:00AM ABC
0 : 00:00
SP