Panasonic PVQ-M2508 - Manual (Page 8)

One Time Setup
When the Combination VCR is turned on for
the first time, it automatically enters the
setup mode. Setup includes the following:
• Choose the language lor on-screen menus
and messages.
• Tell the Combination VCR how your
equipment is hooked up (page 5) so the
Combination VCR can correctly place
channels into memory.
• Get the Combination VCR ready for clock set.
Check list before you begin.
Q Your Combination VCR is connected to an
Antenna, or Cable system (see page 5).
To Set Language, Channels and Clock
1
Press POWER to turn the Combination VCR on.
2
Press CH AV , or VOL^ for on
screen displays in English,
Spanish or French.
• If you choose the wrong language,
please see the “Reset all Combination
VCR Memory Functions” section on
page 25.
• If you use a cable box, the cable box must be left on for auto
channel set.
SELECT UNGUAGE
PUSH CH A ; Eng I Í ah
OPRIMIR CH T :Español
APP. VOL + iFraniBls
1
ACTION
O © ©i
© 0 ©!
© © ©
0 ©
ADD/
DELETE
3
4
Using the AT M ^ heys
Whenever a menu or program
screen is displayed, CHANNEL
UP/DOWN and VOLUME UP/DOWN on
the remote control function as
only. For VOLUME UP/DOWN functions,
use the buttons on the Combination VCR.
Important: If you use a cable box, turn it on and select
the PBS station in your tirhe zone.
3
Press CH A to start Channel
Auto Set and Clock Auto Set.
These on-screen displays will
appear in sequence.
• CH AUTO SET PROCEEDING
• CH AUTO SET COMPLETED
• AUTO CLOCK SET PROCEEDING
CHANNEL/CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN, , .
PLEASE PUSH CH UP KEY
^Case
or
7/28/1998 TUE 12:OOPH
(case
2
}
05T:0N
SETTING : CH 10 AUTO CLOCK SET
AUTO CLOCK SET IS INCOMPLETE
COMPLETED
PUSH ACDON TO SET CLOCK
END : PUSH CH UP KEY
4
(case i) If the displayed time is correct, press CH A to
exit.
• This concludes one time Combination VCR setup.
• See important note at the bottom of this page.
If the displayed time and DST. are not correct...
If you happen to live close to two time zones, the Combination VCR may
have recognized the PBS channel (setting channel) in the wrong time
zone. Please do the following to correct the situation.
a. Make a note of the SETTING: CH number shown on-screen and
press CH A to exit.
b. Delete the setting channel from the Combination VCR channel memory.
(See the Add or Delete a Channel section on the next page.)
C. Press ACTION to display the MAIN MENU.
d. Press AT-^^ to select “CLOCK," and then press ACTION to display
the SET CLOCK screen.
• If you use a cable box and have multiple PBS stations, tune the
cable box to a different PBS station and try auto clock set again
using the menu.
e. Press AT to select "AUTO CLOCK SET,” and then press ► to set
and CH A to start Auto Clock set.
8
IMPORTANT NOTE FOR AUTO CLOCK SET WHEN USING THE CABLE BOX
• Auto clock set will be performed when the Combination VCR is turned
off the first time each day. If you use a cable box and you want auto
clock set to be performed, the cable box must be left on and tuned to
the PBS channel at the time the Combination VCR power is turned off.
• If you use Audio/Video Jack connection between the Combination
VCR and Cable Box, you must also connect the RF coaxial cable in
order to use the auto clock set and channel auto set features.
• If for any reason the time is changed manually, automatic time
correction will not occur.