Panasonic SCCH52 - Manual (Page 15)

Listening to Tape
Playback
• You can use normal, chrome and metal tapes.
• You can use either deck 1 or deck 2 for tape playback.
• This page shows an example using deck 1.
POWER o
STANDBYO/ON
A EJECT
REVERSE MODE o
Switch on the power.
Press A EJECT on deck 1,
and then insert the tape.
Insert the tape with the exposed tape
facing down.
Close the cassette holder.
Front side
Press REVERSE MODE to
seiect the reverse mode.
Each time you press REVERSE MODE,
one of the indicators will light up.
: The deck plays one side only,
and then stop automatically.
■^y- The deck plays both sides, and
then stops automatically.
The deck plays both sides 8
times, and then stop automati­
cally.
When you load tapes into both
decks; sequential playback will
be made. {See page 16)
Press M or ►.
► : The forward side (front side ) will
play.
M : The reverse side will play.
@0
Tape travel direction
VOLUME
Press VOLUME to adjust the
volume level as you like.
To stop tape playback:
Press □.
When tapes are inserted in both decks:
Before proceeding step 4, press DECK 1/2 to select the deck you
want to play.
Usable deck
[5i^ ll'
For your reference:
The deck automatically identifies the type of tape loaded.
15