When there is a television set nearby, While listening to ta pe, Whiie listening to compact disc – Panasonic SCCH52 User Manual

Page 27: While using the remote control

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Problem

Probable came(s)

Suggested remedy

When there is a television set nearby

The picture on the TV
disappears or stripes
appear on the screen.

The location and orientation of the antenna are

incorrect.

If you are using an indoor antenna, change to an

outdoor antenna.

The wiring at the back of the system is

unsuitable.

Separate the antenna wire of the TV set from the

system.

While listening to ta

pe

Sound is tow, interinittent,
or poor quaiity, noisy,
scratchy, or unsteady.

Heads are dirty.

Clean the heads.

Heads have become magnetized.

Use a head degausser available from audio store

to demagnetize the heads.

The deck does not enter
the recording mode

The tabs are removed from the cassette.

Attach tape to cover the space left by removal of the
erase-prevention tabs.

Whiie listening to compact disc

Loading drawer does not
close even when disc are
loaded and ^
OPEN/CLOSE button is

pressed.

Disc is not loaded property on the tray.

Load the disc again.

The dispiay wiii not change.

Disc play does not start

when you press the play

(>-) button.

The disc is not positioned correctly in the disc

tray.

Load the disc on the tray correctly.

The disc is loaded upside down.

Reload the disc.

The disc is dirty.

Wipe the disc with a soft cloth.

The disc is scratched.

Replace the disc with a new one.

The disc is badly warped.

The disc is a nonstandard one.

Replace the disc with a different one.

There is condensation inside the compact disc

changer.

Switch the power ON, and then wait for 60 minutes

before using the compact disc changer.

Certain parts of the disc do

not work.

The disc is dirty.

Wipe the disc with a soft cloth.

While using the remote control

The system cannot be

| The batteries are installed in the reverse polarity.

Re-insert the batteries observing the correct polarity.

operated with the remote

■ ¡■ ^0

batteries are worn out.

control.

I

Replace the batteries with new batteries.

27

Advertising