Panasonic SCCH52 - Manual (Page 5)

Optional antenna connections
You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building, etc.
FM outdoor antenna (not included)
An outdoor antenna should be installed by a competent technician
only.
FM outdoor antenna (not included)
FM Atir
(75Ì1)
GND
AM outdoor antenna (not included)
Connect the outdoor antenna without removing the AM loop antenna.
Run 5 to 12 m of vinyl-covered wire horizontally along a window or
other convenient location.
How to connect a 75-ohm coaxial cable:
(FM outdoor antenna)
1. Remove a piece of the
outer vinyl sheath from
the end.
2. Bundle the shield braid,
and remove a piece of
the inner vinyl sheath
covering the core wire,
3. Connect the core wire
and the shield braid.
30 mm
15 mm
Core wire
Shield braid
External unit connections
• For details, refer to the Operating instructions of the units which
are to be connected.
• When units other than those described below are to be connected,
please consult with your audio dealer.
Analog player
Only an analog player with built-in phono equalizer can be
connected.
This example shows how to connect the analog player with the
PHONO OUT/LINE OUT switch.
Set ttie LINE OUT position at the back of the analog player.
1—^
Analog player
(not included)
“LINE OUT” position
(R)| M |(L)
>
>
H
AUX
D Rear Panel of
this unit