Battery strength, Recharge, C::i> settings battery charge – Panasonic KX-TC1731B User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
c::i> Settings
Battery Charge
Place the handset on the base unit
and charge for about 4 hours before
initial use,
o The IN USE/CHARGE indicator
lights.
Battery strength
You can check the present battery strength on the display while the
handset is on the base unit, while it is in use (making/answering a call
etc.), or after viewing the Caller List, programming, etc.
The battery strength will remain for 5 seconds after using the handset, then
the display will return to the stand-by mode (see next page).
The battery strength is shown as in the chart below.
Display prompt
Battery strength
[ □ D D ]
Fully charged
{ GD]
Medium
{
D ]
Low
'''{
Ü ] '
(flashing)
Needs to be recharged.
Recharge
Recharge
Recharge the battery when:
— “Recharge”
is displayed on the handset,
— “ ( n ] ” flashes on the handset display, or
— the handset beeps intermittently while it is in
use.
» If you DO NOT recharge the handset battery for more than 15 minutes,
the display will keep indicating
“Recharge”
and/or “(
D
] ” will continue
to flash.
a ]
14