Selecting the dialing mode, Settings – Panasonic KX-TC1731B User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Settings
Selecting the Dialing Mode
You can program the dialing mode using the handset near the base unit.
If you have touch tone service, set to “Tone”. If rotary or pulse service is
used, set to “Pulse”. Your phone comes from the factory set to ‘Tone”.
The TALK indicator light must be off before programming.
1
2
Press iPROGRAMl.
o The TALK indicator flashes.
Press SEARCH 0
{Next
key) repeatedly
until
“Set dial mode
?” is displayed.
2 Press SEARCH 0
(Yes
key).
To select “Pulse”, press SEARCH @.
OR
To select ‘Tone”, press SEARCH 0.
® A beep sounds.
o The handset will return to the stand-by
mode.
Save AUTO# ?
v=Next A=Yes
Set dial mode ?
v=Next A=Yes
Dial mode
v-Tone A=Pulse
Dial mode
Pulse
Dial mode
Tone
o To cancel during programming, press I EXIT I or [PROGRAM]. Start again
from step 1.
o If 3 beeps sound and the display shows
“save error”,
move closer to
the base unit and try again. If
“save error”
is still displayed, place the
handset on the base unit. Start again from step 1.
16