Erasing a specific message, Erasing all messages, Erasing messages – Panasonic KX-TC1731B User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Erasing Messages
The unit will announce the remaining recording time after playback, if it is
less than 5 minutes. New messages cannot be recorded when:
- “Memory full” is heard.
- “ESE3” is displayed on the base unit.
- the ANSWER ON indicator flashes rapidly.
Erase some or all of the messages. We recommend you erase
unnecessary messages after each playback.
Erasing a specific message
Press [ERASE] while the message you want to erase is being played.
« The unit erases the message.
o A short beep will sound and the unit will continue to play the next
message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at
one time.
Press I ERASE I.
o “Press ERASE again to erase all
messages” is heard.
ANSWER ON
Within 5 seconds, press (ERASE)
again.
o A long beep sounds and “No
messages” is heard. The base
unit display shows “0”.
o The information in the caller list will not be erased.
To erase the Caller List information, see page 41.
49