Preparing the answering system – Panasonic KX-TC1731B User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparing the Answering System
Selecting the Number of Rings
You can select the number of times the unit rings before the answering
system answers a call, from “2” to “7” or “AUTO (for Toll Saver*)”. Your
phone comes from the factory set to “AUTO”.
^ Press [PROGRAMl.
o The TALK indicator flashes.
2
3
Press I PLAYBACK).
o “P” is displayed on the base unit.
Press d).
o The current setting is displayed
on the base unit.
Press or (D to @ to set the
number of rings.
0:
Selects “AUTO”.
“A” is displayed.
2-7: The unit will answer after the
selected number of rings.
Press I PROGRAMl.
o A beep sounds.
*Toll Saver
(When set to “AUTO”)
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
28