Panasonic DVD-CV35 - Manual (Page 12)

Basic play
When a menu screen appears on
the TV monitor
Press the cursor buttons [▲, T, ◄, ►]
and press [ENTER], or press the numeric
buttons, to select the item.
Play of the selected item now begins.
•The cursor buttons are not effective for selecting items on Video
CDs.
To select a 2'digit number using numeric buttons
Example: To select track 23
Press [s 10], then [2] and [3].
■ Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
[ SKIP): Shows the next menu.
SKIP): Shows the previous menu.
[RETURN]: Shows the menu screen.
[TOP MENU); Shows the first menu screen. |
dvd |
[MENU]: Shows the menu screen. | d v d |
•“NO PLA'y"’ is displayed on the FL display if you bad the following
kinds of discs:
•DVD for which play is prohibited by the initial settings “2 Ratings”
(• page 29).
•DVD with a region number other than “1 ” or “ALL” (■• page 8).
• If appears on the TV monitor when a button is pressed, the
operation is prohibited by the unit or disc.
B Stopping play
Press [■] during play.
•The unit records the point where [■] was pressed during play.
{“>” flashes on the unit’s FL display.)
i
To resume play from where you stopped
(RESUME function)
Press [►] while “t> ” is flashing on the FL display.
Play will resume from the point where [■] was pressed.
To clear the RESUME function
Press [■] again while is flashing on the FL display.
•The RESUME function works only with titles for which the elapsed
play time appears on the unit’s FL display during play.
•This feature remains active if the unit is switched to the standby
mode and then turned back ON, but is cleared if the AC power sup­
ply cord is disconnected unless you were playing a disc on tray 1.
RQT550S