Conserving power, Connection to a television – Panasonic DVD-CV35 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connection to a television
• Ensure that this unit and other equipment to be connected are switched to the standby mode or oft and disconnect the AC power supply cord
before commencing connection,
• Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely.
• Read through the instructions before connecting other equipment.
• Ensure that you observe the color coding when connecting audio and video cables.
• See page 33 for information about how to upgrade your system with other audio/visual equipment.
• Peripheral equipment and optional cables sold separately unless othenwise indicated.
•TV volume may be lower when playing DVDs than during television broadcasts. Turn the volume up while playing DVDs and reduce it to the
previous level before switching the source back to television to avoid sudden changes in volume.
• When you have finished connection, select the appropriate screen type at the initial setting “6 TV Aspect” according to your television (4:3/16:9)
page 10). No changes are needed if you connect the unit to a conventional television (4:3).
• If the unit is connected to a switched outlet on an AV amplifier and the amplifier is turned off, the unit is effectively disconnected from the AC power
supply. We recommend that you connect the unit directly to an household AC outlet.
Conserving power
•The unit consumes approx, 2.0 W even when it is turned off with [POWER (I)/!]. To save power when the unit is not to be used for a long time,
unplug it from the household AC outlet.
§
a
W)
O)
c
£
J'li
o
■o
Connect Your Unit Directly To Your
Television.
If the unit is connected to the television through a video cassette
recorder, the picture may not be played correctly due to the
copy guard. So we strongly recommend you do not connect the
unit to your video cassette recorder when setting up your home
entertainment system.
• Connect to the television section if you connect the unit to a
combined television-video player.
Do not place the
unit on amplifiers or
other equipment
which may become
hot.
The heat can damage the unit.
S video output terminal
The S (separate) video output terminal achieves a clearer picture than the video output terminal by
separating the chrominance (C) and luminance (Y) signals before transmitting them to the
television. (Actual results depend on the television.)
IJBHI
• If your television is monaural, use a stereo-monaural audio cable instead of the supplied audio/video cable. The video part of the cable (yellow)
can still be used if required.
.
^
Audio cable
_
__ To the unit’s audio output terminal (white, “L”)
To TV audio input terminal "
' "
"
__
To the unit’s audio output terminal (red, “R")
RQT5508