Panasonic DVD-CV35 - Manual (Page 5)

Remote control preparations
Remote control signal sensor
a asDsaiflfeffem
Use of batteries
•Align the poles {+ and —) properly when inserting the batteries.
• Do not mix old and new batteries or different types of batteries.
• Do not recharge ordinary dry cell batteries.
• Do not heat or disassemble the batteries. Do not allow them to con­
tact flame or water.
• Remove the batteries if the unit is not to be used for a long time.
• Do not keep together with metallic objects such as necklaces.
• Do not use rechargeable type batteries.
• Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
■O
&
(0
Ot
c
Ê
Q)
Operation notes
• Do not place obstacles between the remote control signal sensor
and remote control unit,
• Do not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent light.
•Take care to keep the remote control signal sensor and end of the
remote control unit free from the dust.
• If this system is installed in a rack with glass doors, the glass doors’
thickness or color might make it necessary to use the remote con­
trol a shorter distance from the system.
To prevent damage
• Never place heavy items on top of the unit.
• Do not disassemble or reconstruct the unit.
• Do not spill water or other liquids info the unit.
RQT5508