Panasonic kx-fmc230 - Manual (Page 124)

Specifications
Technical data about this product
■ Main unit
1. Applicable Lines:
2. Document Size:
3. Effective Scanning Width;
4. Recording Paper Size:
5. Effective Printing Width:
6. Transmission Time*:
7. Scanning Density:
8. Haiftone Levei:
9. Scanner Type:
10. Printer Type:
11. Data Compression System:
12. Modem Speed:
13. Operating Environment:
14. Dimensions (HxWxD):
15. Mass (Weight):
16. Power Consumption:
17. Power Suppiy:
18. Memory Capacity*
Public Switched Telephone Network
Max. 216 mm (8V2") in width
Max. 600 mm {23ye") in length
208 mm (Syie")
Letter: 216 mmx279 mm (SV/x 11")
Legal: 216 mmx356 mm {QVi'x 14")
208 mm
Approx. lOs/page (Original mode)**
Approx. 15s/page (Original mode)***
Approx. 30s/page (G3 Normal mode)
Horizontal: 8 pels/mm (203 pels/inch)
Vertical:
3.85 lines/mm (98 lines/inch)—Standard mode
7.7 lines/mm (196 lines/inch)—Fine/Halftone mode
15.4 lines/mm (392 lines/inch)—Superfine mode
64-level
CCD image sensor
Thermal printing
Modified Huffman (MH), Modified READ (MR)
14400/12000/9600/7200/4800/2400 bps; Automatic Fallback
5 °C-35 °C (41 "F-95 “F), 20 %-80 % RH (Relative Humidity)
149 mm X 377 mm x 355 mm (5%"x 14iyi6"x 1331/32")
Approx. 5.2 kg (11.4 lb.)
Standby: Approx. 7.0 W /Transmission: Approx. 16 W
Reception: Approx. 38 W / Copy: Approx. 52 W
Maximum: Approx. 160 W
120 V AC, 60 Hz (This unit will not function at 50 Hz.)
Approx. 28 pages memory reception
Approx. 25 pages memory transmission
■ Handset
1 . operating Environment:
2. Dimensions (HxWxD):
3. Weight:
4. Power Supply:
5. Frequency:
6. Security Codes:
5 °C-35 “C (41 °F-95 °F), 45 %-85 % RH (Relative Humidity)
Approx. 39 mm x 55 mm x 271 mm (1
1 %/' x 2Ш' x 10"//')
Approx. 135 g (0.3 lb.)
Ni-Cd battery (3.6 V, 600 mAh)
902 MHz-904 MHz, 926 MHz-928 MHz (30 channels)
1 , 000,000
*Transmission speed depends upon the contents of the pages,
resolution, telephone line conditions and capability of the
receiving unit.
**10 second speed based upon the CCITT No. 1 Test Chart on the
condition that memory transmission is performed.
***15 second speed based upon the CCITT N0.I Test Chart.
***Based on the CCITT No. 1 Test Chart in standard resolution when
the Error Correction Mode is set to OFF.
Note:
•Any details given in these instructions are subject to change without
notice.
•The pictures and illustrations in these instructions may vary slightly
from the actual product.
124
CCITT No. 1 Test Chart