Panasonic kx-fmc230 - Manual (Page 67)

Receiving Faxes
SYSTEM SET UP
Setting the distinctive ringing pattern assigned for fax
Program the ringing pattern of the facsimile number that is assigned by your telephone company.
1
2
3
4
Press (MENU).
Display:
Press \u], then [3] (T|.
RING DETECTION
Press [START/COPY/SET],
MODE=OFF [ ▼ A ]
Press @ or @ to select the ringing pattern
assigned to the facsimile number.
A: Standard ring (one long ring)
B: Double ring (two short rings)
C: Triple ring (short-long-short rings)
D: Other triple ring (short-short-long rings)
OFF: Turns off the ring pattern detection feature
(pre-selected setting).
Press [START/COPY/^].
PRINTING
•The unit will print an information list.
SETUP ITEM [ ]
Press (MENU).
How the unit will answer in each receive mode
■ TEL mode: In this mode, you have to answer all calls manually.
—If you hear a fax calling tone (slow beep) or cannot hear voice, press
f START/COPY/SET) to receive documents.
■ TEL/FAX mode: When a call that matches your selected ringing pattern is detected, the unit will
automatically answer the line and activate the fax function to receive documents.
When a call having another ringing pattern is received, the unit will ring until you
answer the call.
■ FAX ONLY mode: In this mode, the unit will answer all calls automatically and activate the fax function.
■ EXTTAM mode: When a call that matches your selected ringing pattern is detected, the unit will
automatically ansvyer the line and receive documents.
When a call having another ringing pattern is received, the facsimile unit and the
answering machine will activate depending on the call.
—If a voice call is received, the answering machine will record the voice message.
—If a fax call is received, the facsimile unit will receive documents automatically.
Note:
•The unit automatically answers a distinctive ring call after the secorid ring. To change the number of rings,
change the FAX ONLY mode ring count (page 59) after setting the ringing pattern.
67