Connecting to a computer, Note, If your pc has a 9 pin com port – Panasonic kx-fmc230 User Manual
Page 79: If your pc has a 25 pin com port, Setup
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Setup
Connecting to a computer
To run the Multi-Function Center software, you need the following software and hardware.
• IBM PC 386, or higher, or compatible meeting all AT bus specifications (DX 33Mhz minimum recommended)
• Microsoft Windows 3.1,3.11 or Windows 95
• Hard Disk drive with at least fourteen (14) MB of available storage
• RS232C Serial Port
Note:
•The unit cannot print on envelopes.
■ If your PC has a 9 pin com port:
If your PC has a 25 pin com port:
79
Advertising