Signaling your pager when you receive a fax – Panasonic kx-fmc230 User Manual
Page 75
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiving Faxes
Signaling your pager when you receive a fax
This feature allows your unit to call your pager when your unit receives a fax message.
1
2
3
4
5
6
7
8
Press [MENU].
Display:
Press then 0 [o]-
SYSTEM SET UP
FAX PAGER
Press [START/COPY/SETl.
MODE=OFF
[ ▼ A ]
Press @ or @ to select “ON”.
MODE=ON
[ ▼ A
• If this feature is not required, select “OFF”.
NO. =
Press (START/COPY/SET).
Enter your pager number.
• If this feature does not work properly, press
[REDIAL/PAUSE] more than once at the end of
your telephone number to extend the paging
time.
If you wish to display a message on your pager,
enter the message after your pager number and
pause(s).
Programming methods may vary depending on
the pager company. Contact your pager company
for details.
•You can enter a total of 46 digits and/or pauses.
Press [START/COPY/SET].
Press [MENU],
SETUP ITEM [
]
Note:
•This feature is not available when the receive mode is
set to the TEL mode.
75