Rgb input indicator, Power button – Panasonic DIGITAL MULTIMEDIA PROJECTOR PT-L501XU User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
©RGB INPUT indicator
(page 24)
This indicator shows whether a
signal is being input to the RGB
input connectors (RGB 1
IN/RGB2 IN). When an input
signal is detected, the indicator
illunninates.
(©LAMP indicator
(page 40)
This indicator illuminates when it
is time to replace the lamp unit. It
flashes if a circuit abnormality is
detected.
(©TEMP indicator
(page 40)
This indicator illuminates if an
abnormally high temperature is
detected inside the projector. If
the temperature rises above a
certain level, the power supply
will be turned off automatically
and the indicator will illuminate or
flash.
©POWER button
(pages 22 and 23)
The POWER button on the
projector’s control panel has a
built-in indicator. This indicator
illuminates red when the MAIN
POWER switch is turned on
(standby mode), and illuminates
green when the power is turned
on and a picture starts to be
projected.
(©Input select (INPUT, RGB,
VIDEO) buttons
(page 22)
©AUTO SETUP button
(pages 23 and 24)
If this button is pressed while a
picture is being projected, the
projection settings will be
adjusted automatically in
accordance with the signal being
input. (“AUTO SETUP” will
appear on the screen during
adjustment.) If “AUTO KEYSTN”
in the OPTION menu is set to
“ON”, the angle of tilt of the
14