Example of connecting with video equipments, Note – Panasonic DIGITAL MULTIMEDIA PROJECTOR PT-L501XU User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Example of connecting with video equipments

Computer for

D-sub 15 (male) - BNC5 (female)

adapter cable (sold separately)

Audio

system

Video deck

Laser disc

player

NOTE:

• Only one audio system circuit is available for the AUDIO IN L-R jacks for

S-VIDEOA/IDEO signals, so if you wish to change the audio input source,

you will need to remove and insert the appropriate plugs.

• Only one audio system circuit is available for the RGB AUDIO IN jacks, so

if you wish to change the audio input source, you will need to remove and
insert the appropriate plugs.

• If an audio system is connected to the AUDIO OUT jack, the sound

volume balance can be controlled by the remote control unit which is

supplied with the projector.

• If the video signal source is connected using a cable with a BNC

connector plug, use a BNC/RCA adapter (sold separately) to convert the

cable end to an RCA plug-type jack.

• Refer to page 50 for a list of compatible YP

b

P

r

signals which can be input

to the projector.

• If the signal cables are disconnected or if the power supply for the

computer or video deck is turned off while the digital zoom or index
window functions are being used, these functions will be cancelled.

18

Advertising