Using the index window function, X1 x1.5 (normal) x2 – Panasonic DIGITAL MULTIMEDIA PROJECTOR PT-L501XU User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U sing the IN D EX W IN D O W function

This function lets you store a picture which is being projected into memory,

so that you can display a still picture and a moving picture on the screen.

0 Press the INDEX WINDOW button.

You can also select INDEX WINDOW from
the MAIN MENU screen and then press the

ENTER button,

NOTE:

• The screen aspect ratio will become 2:3, and

the ratio of the height of the picture to its

width will become 1.5 times the normal ratio.

(2) Use the A and ▼ buttons to set the screen height.

The vertical height can be set to one of three heights: x1, x1.5 and x2.

still

picture

Moving

picture

-

-►

still

Moving

-►

Si

Moving

picture

picture

picture

picture

x1

x1.5

(Normal)

x2

(3)Use the

<

and ^ buttons to switch between the still picture screen

(left) and moving picture screen (right).

still

picture

Moving

picture

Moving

picture

Still

picture

0 Press the ENTER button to store the picture in memory.

NOTE:

• When the screen size is changed, the picture’s aspect ratio will also

change. Make sure that you fully understand the notes on SI signals
which are given on page 32 before using the index window function.

• When steps d) and (3) are carried out, the memory will be reset and a new

picture will be stored in memory.

34

Advertising