360 Systems Instant Replay DR-554 - Manual (Page 14)

Page 14 Instant Replay Owner's Manual
RECORDING OPERATIONS
Transport Control Buttons
The Transport Controls include S TOP , P LAY and R ECORD . They perform in the traditional manner of
tape recorders.
Stop
Immediately ends recording or playback. Stops some sequential operations, such as File Transfer and
Copy Bank.
Play
Starts playback of the currently selected Cut. Note that pressing P LAY initiates playback from the
beginning of the selected Cut, even if it is already playing. The exception is when P LAY is used to
disengage P AUSE .
Record
Places Instant Replay in Record Ready mode. (Instant Replay will allocate disk space, and then enter
record when the P
LAY button is pressed.)
To Record A Cut
•
Set THRESHOLD and turn off RECORD/ERASE LOCKOUT (Record Setup Menu).
•
Set AUDIO INPUT to ANALOG or one of the DIGITAL INPUT SELECTIONS (in Record
Setup Menu).
•
Press R ECORD button. Set Input Level controls (for Analog Input only).
•
Select an alternate Index Number, if desired, using S CROLL A RROWS .
•
Press P LAY ; machine will enter Record mode.
•
When done, press S TOP .
•
Enter Cut Title using alphanumeric keys.
•
Press E NTER to save the title.
T T T I I I P P P : : :
If you wish to place a Cut in an Index Number that is far from the one supplied by default, just use the
number supplied. After recording, use the Move operation to reassign it to the desired Index Number.
Move allows direct entry of an Index number using numeric keys.
To Erase A Cut
Note that RECORD/ERASE LOCKOUT (in RECORD SETUP Menu) must be OFF.
•
Select the Cut.
•
Press the M ENU button.
•
Select OPERATIONS.
•
Press E NTER .
•
Select ERASE.
•
Press E NTER .
•
Press E NTER again to confirm.
•
To erase additional Cuts, select another Cut using the C URSOR A RROW keys (H OT -K EY s
48 and 49) and press E NTER twice.
•
When done, press M ENU to exit.