360 Systems Instant Replay DR-554 - Manual (Page 34)

Page 34 Instant Replay Owner's Manual
WRONG DISK FORMAT
SELECT INT DRIVE?
Pressing E NTER causes Instant Replay to reselect the internal hard drive. The S CROLL A RROW keys
allow selection of other options in the second line of the display:
FORMAT EXT DRIVE?
Pressing E NTER during this display starts the format process.
SELECT EXT DRIVE?
Pressing E NTER during this display causes Instant Replay to try to relog the External drive.
You can now record directly to the External Drive, play Cuts on the External Drive or copy Cuts from
the External Drive to the Internal Drive. You can also Assign Hot-Keys to any of the ten Banks on
the External Drive. Bank Select and all other operations and features) work the same as they do on
the Internal Drive.
Unlike the Internal Drive, the Zip Drive will “spin down” after some period of inactivity to prolong
drive and disk life. When this happens, a Play command will be delayed until the drive spins back up.
The drive can be forced to spin up in preparation for playback by pressing and holding Stop until the
drive access light comes on; instant playback will be available again in about 3 seconds. If instant
response is always required, use the internal drive.
Ejecting a Disk
To eject a disk from the external drive, first select INTERNAL DRIVE, then press the eject button on
the external drive.
Copy Cut
Copy operations always copy material from the currently selected drive to the other drive. Cuts are
never copied to the same drive.
•
Select the Cut to be copied.
•
Press Menu and select OPERATIONS with the Scroll Arrow keys. Press Enter.
•
Select COPY CUT using the Scroll Arrow keys. Press Enter.
•
If desired, select a different Index Number to copy to using the Scroll Arrow keys. You
can only select unused Index Numbers. If the Index Number of the Cut being copied
matches an existing Cut on the destination drive, the Display warns you. Pressing Enter
will start the copy and replace the Cut on the destination drive. If you do not wish to
replace the Cut, select a new number, then press Enter to start the copy process.
•
The display will show COPYING FILE, the file name and the percentage copied as the
operation progresses. When done, the display will show COPY COMPLETE.
•
Press Enter. At this point you can press Menu to exit,
OR
•
Use the Left Arrow or Right Arrow keys (Hot-Keys 48 and 49) to select another Cut to
copy.
•
Press Enter to repeat the copy operation.
Copy Bank
When copying Banks, both the Hot-Key assignments and the Cuts they are assigned to are copied, as
well as the Playlist. Copies are always between the two drives. You have the option of replacing cuts
on the destination drive when Index Numbers of cuts being copied match them, or of assigning new
Index Numbers to the copied Cuts. Instant Replay automatically reassigns the Hot-Keys to match the
new Index Numbers. You also have the option to replace Cuts on the destination drive that have
Names that match any of the Cuts being copied.