360 Systems Instant Replay DR-554 - Manual (Page 42)

Page 42 Instant Replay Owner's Manual
PREPARING TO BACKUP
STOP/CANCEL TO QUIT
Backup begins and the display shows the current file number and the percent completion for the
current file:
FILE 1 OF 193
00% BACKED UP
Backup will proceed until all files are backed up, and the display will show the total number of files.
If S TOP or C ANCEL is pressed during backup the display changes to:
QUIT BACKUP?
PRESS ENTER/CANCEL
Press C ANCEL or S TOP and the backup will continue. Press E NTER to stop backup. An ending
summary will be displayed.
Restore From Backup Procedure
The procedure for Restoring a Bank or Drive is the same. Instant Replay identifies the type of backup
automatically.
•
From the file transfer menu select RESTORE FROM BACKUP and press Enter.
•
The display changes to:
ARE YOU SURE?
PRESS ENTER/CANCEL
•
Press Enter to continue, or Cancel to exit this operation.
•
After pressing Enter the menu button begins to flash and the display shows:
START RESTORE DEVICE
STOP/CANCEL TO QUIT
•
At this time start the DAT machine playing a backup tape through its AES/EBU digital
output, and press Enter. Alternately, press Cancel to exit from this operation.
•
When backup data is received from the DAT player, the display changes to show the
current file number and the percent completion for the current file:
FILE 1 OF 193
00% RESTORED
Restore will proceed until all files are restored; the display will show the number of files successfully
restored. Files received with DAT tape errors are skipped.
If the S TOP or C ANCEL buttons are pressed, the operation continues but the display shows:
QUIT RESTORE?
PRESS ENTER/CANCEL
If you press E NTER the restore discontinues and an ending summary is displayed.
If you press C ANCEL or S TOP at the prompt to quit, the display reverts to updating the file number and
percentage complete and the restore operation continues.
•
After the ending summary you are prompted to press Enter. The machine resets itself
and restarts as it does when power is first applied.