Aviom A-16 - Manual (Page 26)

Aviom A-16 Personal Monitor Mixing System
18 19
mixing boards do not have this signal routing option available. In this case, the
mixer’s insert points (sometimes referred to as an effect insert send and receive) can
be used instead. When using a mixing board’s insert points to get monitor signals into
the A-16T, the Thru jack can be used to complete the insert send/receive loop used by
most manufacturers. Additional information about patching and connecting systems
appears later in this document.
The A-16 Personal Mixer
This section describes the controls, modes, and functions of the A-16 Personal Mixer.
The basic components of the front panel include:
• Sixteen lighted Channel buttons (they are also the Preset select buttons)
• Channel label strip
• Recall button
• Group configuration and edit button
• Solo and Mute buttons
• Pan and Volume knobs
• Bass and Treble tone controls
• Master Volume control
• A-Net signal indicator
Operational Modes
When using the A-16 Personal Mixer, you will be in one of the following modes:
• Mix Mode — Here you can change Channel and mix settings such as
volume, mute, and panning; you’ll spend most of your time in this mode.
• Recall Mode — Activated by the R
ECALL
button, the row of sixteen
Channel buttons are used to select one of the sixteen available mixes