Aviom A-16 - Manual (Page 27)

Aviom A-16 Personal Monitor Mixing System
18 19
saved as Presets.
• Group Mode — Used when creating Groups or editing existing Groups.
This is activated by pressing the G
ROUP
button. The Channel Select
buttons are used to add or delete Channels from a Group.
• Solo Mode — When the S
OLO
button is pressed, the selected Channel (or
Group) is audible while the rest of the mix is muted.
• Save Mode — This mode is activated by pressing and holding both the
R
ECALL
and G
ROUP
buttons. When both buttons are held down, the Save
Mode is active. Pressing any numbered button while still holding this
button combination will save your current mix to that Preset location.
Note: A Preset is saved when the numbered button is released.
Global Controls
The three knobs in the upper right section of the A-16 Personal Mixer affect your mix
volume and tone directly. The Bass, Treble, and Master volume controls are always
active, regardless of the selected Preset.
Tone Controls
Use the Bass and Treble controls to change the overall balance of bass or treble fre-
quencies in your mix. These controls affect the entire mix, not the individual Channels.
The default position for the B
ASS
and T
REBLE
knobs is at 12 o’clock. To add more
low frequencies to your monitor mix, turn the B
ASS
knob to the right of the 12 o’clock
position. To remove lows, turn the knob counterclockwise past the center. To change
the high-frequency content, follow the same procedure; turn the
T
REBLE
knob right to
add highs, left to diminish them.