Aviom AN-16/i-M - Manual (Page 24)

16 AN-16/
i
-M M
ic
i
Nput
M
odule
u
ser
G
uide
The default setting, with the Stereo Link switch to the left, allows independent
control of each input channel from A‑Net Personal Mixer products connected
to the system.
To link channels together as a stereo input, move the Stereo Link switch to
the right. (Moving the switch to the link position causes all Personal Mixers
connected to the system (including the A‑16CS Control Surface used with the
A‑16R) to instantly update their channel status.)
Some things to keep in mind about linked channels:
The position of the • Stereo Link switch does not affect the
audio in the AN‑16/o Output Module.
• Linking channels affects all A‑Net Personal Mixers
connected to the system.
Any combination of stereo and
• mono channels can be
used.
If you want to control two input channels as a stereo
•
source, they must be connected to an odd and even pair
of channels, as indicated by the graphics on the AN‑16/i‑M
front panel.
Changes to the Stereo Link status can be made on the fly,
•
with audio running through the system.
All Personal Mixers will instantly update their channel
•
status if the Link switch position is changed for any channel
pair.
Link status is not saved when you create a Preset on A‑16II
•
or A‑16R Personal Mixers.
Changing the channel link status may affect
• Groups you
have created on A‑16II and A‑16R Personal Mixers in some
cases.
Power LED
The right side of the AN‑16/i‑M Mic Input Module front panel interface also
contains the Power LED. This indicator shows that power is connected to
the unit. When the AN‑16/i‑M is powered up, a valid A‑Net signal is being
generated.