Aviom AN-16/i-M - Manual (Page 50)

42 AN-16/
i
-M M
ic
i
Nput
M
odule
u
ser
G
uide
Signal to Noise Ratio
(unweighted)
Send jack: ‑113dB (Gain = minimum)
A/D: ‑105dB Reference = +14dBu (A/D clip
point)
Mic Input EIN (Equivalent Input Noise): ‑128dBu
(Rs = 150 Ohms, 20kHz BW, Gain = +60dB)
CMMR (Common Mode Rejection Ratio): 80dB
@ 120Hz (Gain = +60dB)
Low Cut Filter ‑3dB @ 85Hz, ‑18 dB per octave
Phantom Power +48 Volts, per channel
Splitter Output, Mic
Thru
Direct coupled passive throughput
A/D converters 24 bit
Digital Outputs A‑Net: 2 (Main and Aux)
A‑Net Expansion: 1
RJ45 connectors
Use unshielded Cat‑5e UTP (or better) cables
THD +N < .003%
Crosstalk ‑90dB
Bit Error Rate (BER) 10(‑12)
EIN (Equivalent Input
Noise)
‑128dBu
(Rs = 150 ohms, 20kHz BW, Gain = +60dB)
CMRR (Common Mode
Rejection Ratio)
80dB @
120Hz (Gain = +60dB)
Power Supply Internal, universal switching type; standard
IEC cable provided
Voltage 100‑240VAC, 50‑60Hz, 60W
Fuse 250VAC; F4AL
Dimensions Width: 19 inches (482.6mm)
Depth: 9.25 inches ( 234.95mm)
Height: 3U, 5.25 inches (133.35mm)
Weight 12 lb. (5.44 kg)
All Aviom products are designed and manufactured in the USA.