Aviom AN-16/i-M - Manual (Page 49)

41 AN-16/
i
-M M
ic
i
Nput
M
odule
u
ser
G
uide
XLR Input (mic/line) Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio ‑
TRS Inputs (balanced
line level)
Tip: Audio +; Ring: Audio ‑; Sleeve: Ground
Insert Send and Return Tip: Audio +; Ring: Audio ‑; Sleeve: Ground
Audio Thru (XLR) Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio ‑
Direct coupled passive throughput
Operating Level +4dBu
Insert Send Connector: TRS
Signal: Impedance Balanced
Nominal level: 0dBu
Peak Level (A/D clip point): +14dBu
The Send connector is a line output in the signal path post gain, post
filter, and post phase controls.
Insert Return Connector: TRS
Signal: Balanced
Nominal level: 0dBu
Peak Level (A/D clip point): +14dBu
The Return connector is a line input to the signal path pre A/D
conversion.
Gain Range Mic: +6dB to +60dB, variable
Line: ‑15dB to +36dB, variable
Maximum Input Level Mic: +14dBu
Line: +28dBu
Input Impedance Mic: 2.4k ohms
Line (TRS): 33k ohms
Insert Return: 39k ohms
Frequency Response 4Hz‑22kHz
Frequency Response
(Send jack)
‑0.3dB @ 20kHz (all gain settings)
A/D Frequency
Response
‑0.1dB @ 20kHz (‑0.4dB @ 20.0kHz, measured
from Mic or Line in)
‑3dB @ 1.5Hz (‑3dB @ 2.0Hz, measured from
Mic or Line in)
Specifications