Aviom AN-16/i-M - Manual (Page 28)

20 AN-16/
i
-M M
ic
i
Nput
M
odule
u
ser
G
uide
A-Net Connections
Three A‑Net connections appear on the rear panel of the AN‑16/i‑M Input
Module. There are two A‑Net Out jacks and one A‑Net Expansion jack.
2 1
4 3 2 1
4 3 2 1
A-Net
Expansion Main Out Aux Out
A - N e t I n p u t M o d u l e
AN-16
Made In USA Conceived, designed and manufactured by Aviom, Inc.
Send Send
Return Return
A-Net outputs and A-Net Expansion connections
A-Net Main Out
The A‑Net Out jack sends the A‑Net data from the AN‑16/i‑M to an A‑Net
compatible device such as the AN‑16/o Output Module. The AN‑16/i‑M has
two A‑Net Out jacks. The first, marked Main Out, is designed to be used as
the primary A‑Net connection to other devices. It has the ability to be used
with the Expansion jack when creating digital snakes of up to 32 channels
(described later).
A-Net Aux Out
The second A‑Net Out jack, labeled Aux Out, carries only the A‑Net signal
generated by the AN‑16/i‑M locally and cannot be used with the Expansion
jack in a 32‑channel snake or audio network configuration.
Use any standard Cat‑5e cable for connections between devices. Remember
that the maximum cable length between A‑Net devices is 500 feet (150