BUCHI Syncor Polyvap - Manual (Page 3)

Syncore ® Accessories
version E 1
1 Scope of delivery 2
1.1 Racks 2
1.2 Glass tubes and holders 3
1.3 Vacuum covers 5
1.4 Condenser units 5
1.5 Insulation for high boiler 6
1.6 Cooling plate 6
1.7 Low temperature insulation 7
1.8 Reflux and inert gas modules 7
1.9 Flushback Module 8
1.10 Instrucctions 8
2 Safety 9
3 Function, putting into operation,
operation and maintenance 13
3.1 Syncore Product Line Accessories 13
3.2 Condenser unit 13
3.3 Racks 15
3.4 Vacuum covers 21
3.5 Cooling plate 26
3.6 Valves 28
3.7 Inert gas cover / inert gas module 29
3.8 Reflux module/flushback module 34
4 Replacement Parts 38
4.1 Racks 38
4.2 Glass tubes and holders 39
4.3 Vacuum covers 41
4.4 Condenser units 44
4.5 Inert gas module 46
4.6 Hoses 47
4.7 Various spare parts 47
5 Appendix 48
5.1 Technical data 48
5.2 Materials used 48
5.3 Table of solvent 49
5.4 FCC requirements (for USA and Canada) 55
5.5 Declaration of conformity 56
Table of contents
Table of contents
Read this operation manual through ca-
refully before starting to use the BUCHI
Syncore Product Line. Always keep these
instructions ready at hand close to the
equipment so that they may be consulted
quickly at all times. Chapter 2 provides
important safety instructions that must
be followed to ensure safe operation of
the unit.
We reserve the right to make technical changes without
prior notice. No portions of this operation manual may be
reproduced in any form (including with the use of electro-
nic or optical systems), duplicated, or distributed without
written permission from BÜCHI Labortechnik AG. All rights
reserved. Copyright © BÜCHI Labortechnik AG 2011
en, Version E Order code
Syncore ® Instructions 93013