BUCHI Syncor Polyvap - Manual (Page 46)

Syncore ® Accessories
44 version E
Figure 63: Condenser unit S
4.4 Condenser units
37693
03275
27344
37686
37694
40653
Condenser unit S complete
(PLASTIC + GLAS)
Order code
1 Condenser unit S complete,
1000 ml, (PLASTIC+GLAS coated) 37690
Consisting of:
1 Support rail for attaching the
condenser unit
37693
1 Cooler S 40653
1 Vacuum stopping device 37686
1 Cross-shaped sleeve, complete 27344
1 KS” clamp for the receiving flask 03275
1 “NS” clamp for the vacuum adaptor/
cooling unit 37694
1 Pivoting clamp 11151
2 Screw cap GL 14
3 Hose nipples GL-14, bent, 3 units
41987
1 Vacuum hose, PFA, ribbed, 0.6 m cpl. 37695
2 Sealing rings for vacuum hose PFA rib. 48899
2 Cooling hoses, silicone, 1.5 m 43940
1 Receiving flask, 1000 ml
(PLASTIC+GLAS coated) 20728
1 Condenser unit S complete,
2 liter, (PLASTIC+GLAS coated) 40146
Consisting of:
1 Support rail for attaching the condenser unit
37693
1 Cooler S 40653
1 Vacuum stopping device 37686
1 Cross-shaped sleeve, complete 27344
1 “KS” clamp for the receiving flask 03275
1 “NS” clamp for the vacuum adaptor/coo-
ling unit
37694
1 Pivoting clamp 11151
2 Screw cap GL 14
1 Hose nipples GL-14, bent, 3 units
41987
1 Vacuum hose, PFA, ribbed, 0.6 m cpl. 37695
2 Cooling hoses, silicone, 1.5 m 43940
1 Receiving flask, 2000 ml
(PLASTIC+GLAS coated) 25265
2 Sealing rings for vacuum hose PFA rib. 48899
(2l) 25265
(1l) 20728
37695
04133
41987
05155
11151
4 Replacement Parts