BUCHI SpeedDigester K-436 - Manual (Page 27)

6 Operation
27 K-425 / K-436 Operation Manual, Version A
6 .1 .4 SpeedDigester K-436 — rear side
Bracket with magnetic
(elbow) suction plugs
T-piece with
suction hoses
Type plate
Fuse holders
Power socket
6 .2 Preparing of SpeedDigester, suction module(s) and sample tubes
Section 6.2.1 and 6.2.2 describes the standard procedure for preparing a rack with sample tubes of
300 ml or 250 ml. When 500 ml tubes are being used, additionally refer to section 6.2.4.
Note
A rack may achieve a weight of up to 7.5 kg when loaded with samples and equipped with a suction
module. Be prepared for the weight when lifting a rack!
! WARNING
Serious chemical burns by corrosives and peroxides.
Observe supplementary data sheets of all used chemicals •
Handle corrosives and other chemicals in well ventilated environments only •
Always wear protective goggles •
Always wear protective gloves •
Always wear protective clothes •
Do not use damaged glassware •
Use only glassware from qualified vendors (see 2.5.4) •