BUCHI SpeedDigester K-436 User Manual
Page 30
6 Operation
30
K-425 / K-436 Operation Manual, Version A
1
2
Rear side
Front side
Insert the prepared sample tubes into the rack(s) — start with the first (front) position.
•
When the digestion session does not require a full set of samples, then fit unused positions with a
•
glass cap to seal the suction circuit!
Note
Make sure the adapter piece is tightened well without damaging the glassware.
•
Keep suction hose(s) as short as possible under the given circumstances.
•
Unused positions should be arranged at the rear end of the rack.
•
3
3
4
Rear side
Lift the metal clips to unlock and shift the black handles
•
3 aside.
Carefully push down the suction module
•
4 straight onto the sample tubes and shift the handles
back into locking position.
➥ The metal clips must snap in to securely lock the handles position!