COP-USA DVRPRO04 - Manual (Page 108)

103
Chapter 14
1.Click on the System link in the browser window to
enter the Remote System Settings screen.
In this screen, you are provided with the capability of remote system settings,
including:
1.DVR ost and LA - ou are able to see all network settings of the
ost, and among them is the IP address that s relative to remote
monitoring. nce have you entered this IP address in the browser
window, you can connect to monitor the DVR ost. CA TI
Do
not attempt to change the network settings on the ost from the
remote browser, or else communication with the ost will be lost,
disabling any further operations.
2.The version number Version 3.5.4 will be visible in the header.
3.Internet - In this field, you can setup the info regarding to Internet
and modem dial-up
a.DNS Server IP
b.Default Gateway IP
c.The corresponding Virtual Server TCP ports.
4.Current System Time, the System Time/Date to be changed.
5.Limot out bandwidth, ew D format, nable telnetd, Minimi e video
si e, and the number P frames after I frames.
6.Recycle Recording, Auto Logon, Auto Skip operations through a
browser are not the same with operations on the ost, so remote
monitoring functions don t support Auto Logon and Auto
Skip . The setting and modification of these two functions remotely
can only be seen on the ost.
Also, the current status of the hard disk capacity (how much space can be
used and has been left) will be shown at the bottom of the screen.