COP-USA DVRPRO04 - Manual (Page 92)

87
Chapter 14
When the user clicks on the first tab, the upper right side of the window
shows the following information:
When the user clicks on the second tab, the upper right side of the window
shows the following monitoring information:
The next section deals with how to operate recorded data playback remotely:
Remote Playback
1.Click Main to enter the remote monitor screen.
2.Click Playback in the screen to open the window for
playback.
1.Recording time is displayed.
2.If recycling recording is taking place, then a
green recycling recording icon is also displayed.
3.the amount of space which has been used on
each hard disk and the space remaining, for up
to a total of 7 hard disks.
4.A hard disk damage icon is displayed if there is
damage to a hard disk.
1.An indication whether each camera has an alarm
event for motion detection a green light shows
normal status, a red light is alarm mode
2.An indication whether each camera has an alarm
event for Din a green light shows normal status,
a red light is alarm mode
3.An indication whether each camera has an alarm
event for Dout a green light shows normal
status, a red light is alarm mode
4.Select the camera, and record the images from
that camera to the local viewing hard disk.