COP-USA DVRPRO04 - Manual (Page 49)

44
5.Click the checkbox next to Enable first, then click Enable Trigger
Period again and enter the period. With this function, the users don t
need to be in an alarm environment all day long, and they can set their
own desired alarm period according to their actual needs.The Dura-
tion is for setting the active alarm period ex The same kind of alarm
will be overleaped during the Alarm Duration and the recording frame
rate when alarm-received. Which only functions when you selected
the record trigger mode It is adjustable for each is camera and DI.
6.Then select one of the Triggering Devices from the Tab field
windows below.
Alarm Record Triggering
The following shows how to use Record Alarm:
1.Click the Alarm Tab first.
2. rom the General tab select the Duration for motion detection
triggering and click the checkbox next to AdjustFrameRateTo .
to select the frame speed for the motion detection.
Figure 8-2: General Field
3.Select the appropriate triggering event for alarm recording
(“Camera”, “Din”)
4.Select the entire Enable field for to enable 24 hour recording
duration. To set up other record durations, tick off the entire
Enable field first, then select Enable under Trigger Period
to set the record duration.
5.Click REC .
6.Click Add
7.Click Apply , then OK to activate.