COP-USA DVRPRO04 User Manual
Page 109
104
Remote Alarm Settings
Remote Alarm Setting functions give the administrator the opportunity to
change alarm functions from a remote site.
Figure 14-36: Remote Alarm Settings
The operation of remote alarm setting is the same as with local setting.
Once you have added all the alarm modes, click “OK”
in the right
corner to save the changes to the Host and make them effective.
Remote Alarm Log Viewing
Here all the detailed logs about the alarms will be listed out, including the
cause, triggered time and the descriptions of the triggering condition.
Through the use of the logs you will be able to view the status of all of the
alarms conveniently. And to delete an unnecessary alarm log, check the log
on the right side first, then click “Delete”
to delete the selected
alarm log.
Click “Alarm Log”
, and a new window will appear as below: