COP-USA DVRPRO04 - Manual (Page 14)

9
Chapter 2 Chapter 2
GETTING STARTED
This chapter explains what you need to do after turning on your Digital Video
Recorder. Experienced DVR users may skip this chapter and then return to
it for reference if there are any problems in reading other chapters.
Powering Up the Digital Video Recorder for the First Time
1.Attach the cameras to the C inputs of the DVR capture cards
according to the desired numbering sequence.
2.Connect the LCD or CRT Display to the V A Input.
3.Connect the R -45 LA Cable to the thernet LA Card.
4.Connect the eyboard and the Mouse to their respective PS/2 Ports.
5.Connect the Printer to the Printer Port. C M1 is used to connect a
M D M with the 4 or 8 channel type, a PT camera may be
connected to C M1 instead of a M D M , and C M2 which is only
available for 12 or 16 channel types is used to connect a PT camera.
6.Check the Voltage Switch so that it matches your region s
requirements.
7.Connect one end of the Power Cord to the electrical outlet and the
other to the Digital Video Recorder.
8.Power up the DVR by pressing the Power Switch on the front of the
DVR.
Figure 2-1: Switch on your Digital Video Recorder (16-CH DVR)