COP-USA DVRPRO04 - Manual (Page 54)

49
Chapter 8
5. Type in the appropriate email address. An additional email address
may be specified in CC .
6.Adjust the Send parameter as desired to specify the number of
seconds of video you d like to send in the email; a value of from 1 to 5
seconds may be chosen, and the default value is 2 seconds .
7. If you click Attach playback program , you can attach to the
email a playback program of up to 1.78M , so that the video may be
played by the email recipient s . If the recipients have already
downloaded the playback program file, you do not need to choose
this option again.
8.Then click Add , and the window below will show
EMAIL with the selections made.
9. Click Apply , and OK .
Alarm Digital Output Triggering
Alarm Digital Output may activate the digital output at the time of detecting
alarm. Follow the instructions to set the Digital Output.
1. Click the Alarm Tab.
2. Select the Camera .
3. Select a Trigger Period .
4. Click the Dout Tab
Figure 8-10: Output Port Tab
5.Select an Dout.
6.Tick off Enable / Not-Enable , the icon with a tick is Enable .