Cisco SERIES 7970 - Manual (Page 16)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-16
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8148-01
• Security Configuration Menu, page 4-22
• QoS Configuration Menu, page 4-24
• Network Configuration, page 4-24
For instructions about how to access the Device Configuration menu and its
sub-menus, see the
“Displaying a Configuration Menu” section on page 4-2 .
CallManager Configuration Menu
The CallManager Configuration menu contains the options CallManager 1,
CallManager 2, CallManager 3, CallManager 4, and CallManager 5. These
options show Cisco Unified CallManager servers that are available for processing
calls from the phone, in prioritized order.
To change these options, use Cisco Unified CallManager Administration.
For an available Cisco Unified CallManager server, an option on the CallManager
Configuration menu will show the Cisco Unified CallManager server IP address
or name and one of the states shown in
Table 4-3 .
Table 4-3 Cisco Unified CallManager Server States
State Description
Active Cisco Unified CallManager server from which the
phone is currently receiving call-processing services
Standby Cisco Unified CallManager server to which the
phone switches if the current server becomes
unavailable
Blank No current connection to this Cisco
Unified CallManager server