Frequently asked questions – Freerider FR168-4IT/Luggie User Manual

Page 26

Advertising
background image

4. Do not use an extension cord to connect the charger onto the charging unit of your

Luggie unless absolutely necessary. Use of an improper extension lead could

result in fire and/or electric shock.

5. Do not use the charger if it has received a sharp blow, been dropped or otherwise

misused in anyway.

6. Do not dismantle the charger, poke or drop objects through the slots in the charger

case.

7. Do not unplug or interrupt the recharge cycle until the charging cycle has been

completed. Failure to observe this instruction can damage the integrity of the

battery.

8.There is a drive inhibit function on your scooter. The scooter cannot be driven

when the charger is plugged into your Luggie.

9. Avoid exposure to heat when charging your battery.

YOUR GUIDE TO SAFE AND LASTING BATTERY

1. For longest life of your battery, your battery should be recharged after use,

preferably overnight.

2. When storing your Luggie and battery for an extended period, fully charge your

battery and remove the battery from the leads on your Luggie scooter. The

battery should never be stored fully discharged. Fully discharging the battery pack

before extended storage will put your battery in a “sleep mode” which could

render it un-chargeable when you are ready to use your scooter.

3. If your Luggie has been stored for some time, always recharge your battery before

use.

4. Every six months, check the connection on the battery pack. Make sure the

connection area is clean.

5. Your battery carries a limited manufacturer warranty which is subject to a

stringent wear and tear clause. Any gradual deterioration in performance is

normally associated with fair wear and tear. Misuse or accidental damage is not

covered by the manufacturer's warranty.

CHARGING YOUR BATTERY AWAY FROM YOUR SCOOTER

In circumstances when your scooter is stowed in your car, your battery can be

recharged away from your scooter with the optional Luggie home docking station.

Simply connect the 3-pin plug on your charger to the home docking station before

connecting it to the wall socket. Insert your Luggie battery onto the home docking

station to start charging the battery away from your scooter.

Q: How do I turn on Luggie scooter?

A:

Locate the on/off switch below the handlebar on the right side. If you do not see a

solid red on the switch, check to make sure the battery has been properly installed.

Refer to the owner’s manual for diagnosis.

Q: What does the magnetic brake release do?

A:

In time of emergency or when your battery is out of power, disengaging the

magnetic brake release will inhibit you from driving the scooter; but, it will allow

your scooter to be pushed freely by an attendant.

25

FREQUENTLY ASKED QUESTIONS

Advertising