Operating your luggie – Freerider FR168-4IT/Luggie User Manual

Page 9

Advertising
background image

Use the trigger to adjust the tiller to the most comfortable angle for and to fold up

and down the tiller for ease of transport.

SERVICE -

Your Luggie has been designed to be service friendly. Sealed lithium

battery which is virtually maintenance-free will give your Luggie the power it

requires. Should you need to take your battery pack on an aircraft, use the

battery box originally shipped with your Luggie scooter for transport. The battery

box has been specially designed to safely carry lithium battery of this size in

accordance with the International Air Transport Association (IATA). (Please

consult your carrier of choice for additional details).

SAFETY -

The speed controller has been designed with extensive self-checking

circuits to give you the maximum 'state-of-the-art' safety technology.The

Luggie comes with a fully automatic braking system for peace of mind in any

environment.

CHARGING -

Your Luggie is fitted with a battery indicator on the top console. When

the battery meter is in the red zone, it is advised that you charge your battery.

Follow the Battery & Battery Charging guidelines outlined on page 23-30 of the

manual.

Caution :

DO NOT power off when you are moving; this will automatically activate

the motor parking brake and could place you in a dangerous situation.

Your Luggie is fitted with anti-tipping wheels in the rear of the scooter. DO

NOT remove these anti-tipping wheels. They are an important part of the Luggie

designed specifically for your safety. They help protect against backwards tipping on

excessively sharp inclines.

8

Before setting out on your Luggie, you need to make sure that your seat is in the

correct riding position. Set the seat to your desired height for your needs.

UNFOLD LUGGIE SCOOTER

1. Make sure your Luggie is on flat ground before adjusting the height of the seat.

With the scooter upright as shown in (FIG 1), pull the chassis locking release

ring to your scooter to separate the front and rear chassis. Once the front and rear

chassis are disengaged, guide the scooter down by holding the base of the seat

with both hands. Refer to the enclosed Quick Start Guide for additional details.

Your scooter should now look like (FIG 2) when unfolded.

FIG 2

FIG 1

OPERATING YOUR LUGGIE

Advertising