Freerider FR168-4IT/Luggie User Manual
Page 35
Warning :
Contact your electronic waste disposal facility to properly dispose your
Luggie battery.
Note:
The charger supplied with your Luggie scooter is specifically designed for
Luggie battery and may not work correctly with other brand of battery. (Refer
to Batteries and Battery Charging section of this manual for additional details.)
LUBRICATION
The Luggie is designed with low maintenance in mind. Wheel and steering bearings
are sealed for life. The following are suggested service intervals for your Luggie
scooter.
Caution :
Only drive your Luggie scooter if it is in full working order.
RECOMMENDED SERVICE INTERVALS
DAILY CHECKS
Operation of motor brakes
Operation of driving brake
Operation of seat lock
Tire condition
Battery capacity
WEEKLY CHECKS
Chassis locking mechanism
Armrest adjustment knobs
Allow battery charger to go through a full recharge cycle. Wait until the green
light illuminates.
Clean paintwork with auto shampoo. DO NOT use harsh abrasives or power
washer.
SIX MONTHS CHECKS
Tire wear, replace as necessary.
All fasteners and fittings for sound function.
Tension of handle bar lock and hinge bolt.
Battery connections.
Inspect all electrical plugs and sockets for damage, good contact and fit.
ANNUALLY CHECKS
Front wheel bearings for wear.
Handlebar bearings
Chassis for sound welds
Rear drive wheel hub keys
All wheel bolts
Drive axle securing bolts
Motor mounting bolts
Magnetic motor brake disc and function
Main wiring loom for damage
34