Freerider FR168-4IT/Luggie User Manual
Page 33
ELECTRONICS
Servicing of the drive electronics and charger should only be carried out by your
Authorized Luggie Service Dealer. These units are sealed and should not be opened.
BROKEN SEALS WILL INVALIDATE YOUR WARRANTY. Below are some pointers
to keep in mind.
1. DO NOT operate your Luggie in exceptional weather conditions i.e. very heavy
rain.
2. Cover your scooter if it is left unattended and outside for a long period of time.
3. DO NOT drive your Luggie through deep water. This could damage the electronic
speed controller. Sea and road salts are very corrosive and should be avoided if
possible.
DRIVE TRANSMISSION LUBRICATION
The Luggie is fully lubricated on delivery. You will not need to fill transmission fluid
on your scooter. Note: Your Luggie transmission is filled with a special lubricant. Do
not attempt to force grease into the transmission as this will contaminate the original
lubrication and will invalidate your warranty.
Caution :
When lifting the transmission, keep well away from clothing. It is normal
to find a light film of lubrication around this part.
MOTOR BRAKES
Safety Note:
For your own safety, we recommend that you check the function of
your Luggie brakes prior to any journey. If the motor brake is functioning correctly
and the drive is engaged, you will not be able to push your scooter when the scooter
is powered on or off without the use of the wig wag levers.Refer to the Freewheeling
Your Luggie on page 12 for additional details.
Warning :
Letting go of the wig wag lever while driving will reduce the speed
of your Luggie very quickly. If you notice a change in the normal slowing/braking
condition of your scooter, or if your Luggie does not slow down quickly, please do not
use your scooter. Contact your Authorized Luggie Dealer.
TIRES
Check the condition of your tires regularly. Look for signs of wear, cuts and foreign
objects lodged in the tread of your Luggie tires (FIG 28).
32
FIG 28