FRITSCH PULVERISETTE 7 classic line - Manual (Page 13)

n Unauthorised alteration of the PULVERISETTE 7 classic line will void
Fritsch's declaration of conformity to European directives and void
the guarantee.
n Only use the PULVERISETTE 7 classic line when it is in proper working
order, as intended and in a safety- and hazard-conscious manner
adhering to the operating manual. In particular, immediately rectify
any malfunctions that could pose a safety hazard.
n If, after reading the operating manual, there are still questions or
problems, please do not hesitate to contact our specialised per-
sonnel.
2.6 Protective equipment
Protective equipment must be used as intended and may
not be disabled or removed.
All protective equipment must be checked regularly for
integrity and proper functioning.
For start-up, the hood (3) has to be closed.
The hood (3) is locked:
n without mains connection
n during operation
The hood (3) can only be opened if the mill's drive is at a
standstill.
2.6.1 Opening the hood without mains connection
CAUTION!
The emergency release must not be activated while the
machine is running! Disconnect the machine from the
mains before the emergency release. Failure to observe this
will render void the guarantee, and releases us from lia-
bility for any resulting damage to the device as well as for
any resulting personal injury.
Safety information and use
- 13 -