FRITSCH PULVERISETTE 7 classic line - Manual (Page 21)

4.3 Setting up
DANGER!
Do not step under the transport pallet during transport.
CAUTION!
The weight of the planetary micro mill is approx. 35 kg!
CAUTION!
Crushing hazard!
Always lift with 2 persons.
Hold the bottom edge of the housing when lifting the
device.
NOTICE!
Operating the planetary micro mill while it is standing on
the transport pallet is prohibited.
n Lift the mill from the transport pallet with at least 2 persons.
n Place the mill on a flat, stable surface. A fastening set is provided to
help stabilise the mill and prevent the mill from shifting during oper-
ation. Screw the two rings diagonally into the surface using the
drilling template. Position the mill with 2 device feet in the provided
rings.
n Make sure that the planetary micro mill can be easily accessed.
There has to be sufficient space to reach the main switch on the
back of the device.
n Keep any obstructions away from the air outlet on the side ventila-
tion grate. Risk of overheating!
Installation
- 21 -