FRITSCH PULVERISETTE 19 - Manual (Page 47)

8 Maintenance
25 Exhaust filter
A Filter holder
B Filter foam mat
NOTICE!
Before starting maintenance work, that does not require
mains voltage, unplug the mains plug (20) and protect the
device against being unintentionally switched back on
again!
Indicate maintenance work with warning signs.
The most important element of maintenance of the cutting mill is regular
cleaning (Ä Chapter 7 ‘Cleaning’ on page 42).
We recommend keeping a safety logbook Ä Chapter 13
‘Safety logbook’ on page 58, where all work (maintenance,
repairs......) performed on the device is entered.
Maintenance
- 47 -