FRITSCH PULVERISETTE 2 - Manual (Page 15)

3 Technical data
3.1 Dimensions
410 x 310 x 460 mm (height x width x depth)
3.2 Weight
24 kg (net)
34 kg (gross)
3.3 Operating noise
Emissions value of workplace according to DIN EN ISO 3746:2005 L
Pa
=
49.5 dB(A). The noise level measurement was conducted with feed pel-
lets as grinding stock and grinding elements made of agate!
3.4 Voltage
The device can be operated in two voltage ranges:
n Single phase alternating current 100-120 V ± 10%
n Single phase alternating current 200-240 V ± 10%
Transient overvoltage according to overvoltage category II is permitted.
3.5 Current consumption
The maximum current consumption is approx. 0.8 A at 200-240 V, 1.8 A
at 100-120 V.
3.6 Electrical fuses
The following are on the back of the device are:
n A fuse in the mains supply unit.
n Overload protection for the drive motor.
3.7 Material
The feeding size and quantity of the grinding stock should not exceed 6 -
8 mm and 190 ml respectively. The optimum sample quantity is around
150 ml. (Crush larger sample pieces beforehand, if necessary.)
Technical data
- 15 -