FRITSCH PULVERISETTE 2 - Manual (Page 39)

12 Exclusion of liability
Before using the product, be sure to have read and understood this
operating manual.
The use of the product requires technical knowledge; only commercial
use is permitted.
The product may be used exclusively within the scope of applications set
down in this operating manual and within the framework of guidelines
put forth in this operating manual and must be subject to regular main-
tenance. In case of non-compliance, improper use or improper mainte-
nance, the customer assumes full liability for the functional capability of
the product and for damage or injury arising from violating these obliga-
tions.
The contents of this operating manual are subject in entirety to copy-
right law. This operating manual and its contents may not be copied, fur-
ther distributed or stored in any form, in part or in whole, without the
prior written consent of Fritsch.
This operating manual has been prepared to the best of our knowledge
and checked for accuracy at the time of printing. FRITSCH GMBH
assumes no guarantee or liability whatsoever for the accuracy or com-
pleteness of the contents of this operating manual, including but not
limited to the implied warranties of merchantability and fitness for a par-
ticular purpose, unless liability is expressly prescribed by applicable laws
or jurisprudence.
FRITSCH GMBH expressly reserves the right to modify and/or update this
operating manual without prior notice. The same applies to modifica-
tions and improvements to the products described in this operating
manual. It is the responsibility of the user to ensure that they have the
current version of this operating manual. For more information, please
contact your local FRITSCH GMBH distributor or Fritsch GmbH, Industri-
estr. 8, D-55473 Idar-Oberstein.
Not all parts shown here are necessarily installed in the product. The
buyer is not entitled to delivery of these parts. If interested, please con-
tact your local FRITSCH GMBH distributor or Fritsch GmbH, Industriestr.
8, D-55743 Idar-Oberstein.
FRITSCH GMBH takes the greatest care to ensure that the quality, relia-
bility and safety of your products are continuously improved and
adapted to the state of the art. The supplied products as well as this
operating manual conform to the current state of the art when they
leave the sphere of influence of FRITSCH GMBH.
By using the product the customer agrees with this and recognizes that
defects, malfunctions or errors cannot be completely excluded. To pre-
vent risk of damage to persons or property or of other direct or indirect
damage, resulting from this or other causes, the customer must imple-
ment sufficient and comprehensive safety measures for working with the
product.
Exclusion of liability
- 39 -