FRITSCH PULVERISETTE 2 - Manual (Page 9)

2.3 Obligations of the operator
Before using the PULVERISETTE 2, this manual is to be carefully read and
understood. The use of the PULVERISETTE 2 requires technical knowl-
edge; only commercial use is permitted.
The operating personnel must be familiar with the content of the oper-
ating manual. For this reason, it is very important that these persons
actually receive the present operating manual. Ensure that the operating
manual is always near the device.
The PULVERISETTE 2 may exclusively be used within the scope of applica-
tions set down in this manual and within the framework of guidelines
put forth in this manual. In case of non-compliance or improper use, the
customer assumes full liability for the functional capability of the PUL-
VERISETTE 2 and for any damage or injury arising from failure to fulfil this
obligation.
By using the PULVERISETTE 2 the customer agrees with this and recog-
nizes that defects, malfunctions or errors cannot be completely
excluded. To prevent risk of damage to persons or property or of other
direct or indirect damage, resulting from this or other causes, the cus-
tomer must implement sufficient and comprehensive safety measures
for working with the PULVERISETTE 2.
Neither compliance with this manual nor the conditions and methods
used during installation, operation, use and maintenance of the PUL-
VERISETTE 2 can be monitored by Fritsch GmbH. Improper execution of
the installation can result in property damage and thus endanger per-
sons. Therefore, we assume absolutely no responsibility or liability for
loss, damage or costs that result from errors at installation, improper
operation or improper use or improper maintenance or are in any way
connected to these.
The applicable accident prevention guidelines must be complied with.
Generally applicable legal and other obligatory regulations regarding
environmental protection must be observed.
2.4 Information on hazards and symbols used in this manual
Safety information in this manual is designated by symbols. Safety infor-
mation is introduced by keywords that express the extent of the hazard.
DANGER!
This symbol and keyword combination points out a directly
hazardous situation that can result in death or serious
injury if not avoided.
Safety information
Safety information and use
- 9 -